Vacature 4

Spraystream help desk

Welcome at Spraystream !

These machines are designed to produce a steady flow of microdroplets, effectively capturing airborne dust particles and preventing the release of fugitive dust. In addition to dust suppression, Spraystream is also renowned for odour control and cooling solutions.

How can we help you?

To help you get started, we've prepared a concise manual for our dust suppression machines, available in models S4.0, S7.5, S11.0, S15.0, S18.5, and S30.0 (HP).

! This manual does not replace the official manual.
! Only personnel with proper training and good knowledge of the equipment are allowed to operate the machine.

For any other question or problem, please contact Spraystream or your local dealer.
Spraystream by Savic Group | Tel 0032 56 44 33 00 | info@spraystream.com

Short manual S.4/7.5/11.0/15.0/18.5/30.0 (HP)

This short manual does not replace the official manual.

1. Remove the transport lock and any straps See that all moving parts can move freely.
2. Connect the electrical power cable All electrical connections must follow local electrical regulations. Check that the emergency button is not pushed in, if so pull and turn the button to relaese
3. Connect with a water hose Before connecting water, flush the supply hose until clear water, free of impurities flows out (>2bar - <5bar). Then connect the hose to the unit.
4. Start the machine Press the FAN button (1) then after 10 sec the PUMP button (2).
5. Rotation Bring the cannon into centre position with the selector switch (4). Select the preset angle (5), activate the function with button (3).
6. Stop the machine Press the PUMP button (2) then after 30 sec the FAN button (1).
Póngase en contacto con nosotros
¿Preguntas sobre nuestro producto?
Nuestro asesor técnico Mathies estará encantado de ayudarle.